debugfs - ext2 file system debugger
debugfs [ -b blocksize ] [ -s superblock ] [ -f cmd_file ] [ -R request
] [ -V ] [ [ -w ] [ -c ] [ -i ] [ device ] ]
The debugfs program is an interactive file system debugger. It can be
used to examine and change the state of an ext2 file system.
device is the special file corresponding to the device containing the
ext2 file system (e.g /dev/hdXX).
-w Specifies that the file system should be opened in read-write
mode. Without this option, the file system is opened in read-
-c Specifies that the file system should be opened in catastrophic
mode, in which the inode and group bitmaps are not read ini-
tially. This can be useful for filesystems with significant
corruption, but because of this, catastrophic mode forces the
filesystem to be opened read-only.
-i Specifies that device represents an ext2 image file created by
the e2image program. Since the ext2 image file only contains
the superblock, block group descriptor, block and inode alloca-
tion bitmaps, and the inode table, many debugfs commands will
not function properly. Warning: no safety checks are in place,
and debugfs may fail in interesting ways if commands such as ls,
dump, etc. are tried. debugfs is a debugging tool. It has
Forces the use of the given block size for the file system,
rather than detecting the correct block size as normal.
Causes the file system superblock to be read from the given
block number, rather than the default (1). If you give a -s
option, you must also give a -b option.
Causes debugfs to read in commands from cmd_file, and execute
them. When debugfs is finished executing those commands, it
Causes debugfs to execute the single command request, and then
-V print the version number of debugfs and exit.
Many debugfs commands take a filespec as an argument to specify an
This is a list of the commands which debugfs supports.
Dump the contents of the inode filespec to stdout.
Change the current working directory to filespec.
Change the root directory to be the directory filespec.
close Close the currently open file system.
Clear the contents of the inode file.
dump [-p] filspec out_file
Dump the contents of the inode filespec to the output file
out_file. If the -p option is given set the owner, group and
permissions information on out_file to match filespec.
Expand the directory filespec.
feature [fs_feature] [-fs_feature] ...
Set or clear various filesystem features in the superblock.
After setting or clearing any filesystem features that were
requested, print the current state of the filesystem feature
find_free_block [count [goal]]
Find the first count free blocks, starting from goal and allo-
find_free_inode [dir [mode]]
Find a free inode and allocate it. If present, dir specifies
the inode number of the directory which the inode is to be
located. The second optional argument mode specifies the per-
missions of the new inode. (If the directory bit is set on the
mode, the allocation routine will function differently.)
freeb block [count]
Mark the block number block as not allocated. If the optional
argument count is present, then count blocks starting at block
number block will be marked as not allocated.
Free the inode specified by filespec.
help Print a list of commands understood by debugfs(8).
icheck block ...
Print a listing of the inodes which use the one or more blocks
specified on the command line.
does not remove any directory entries (if any) to this inode.
See the rm(1) command if you wish to unlink a file.
Change the current working directory of the debugfs process to
directory on the native filesystem.
ln filespec dest_file
Create a link named dest_file which is a link to filespec. Note
this does not adjust the inode reference counts.
logdump [-ac] [-b<block>] [-i<inode>] [-f<journal_file>] [output_file]
Dump the contents of the ext3 journal.
ls [-l] [-d] filespec
Print a listing of the files in the directory filespec. The -l
flag will list files using a more verbose format. The -d flag
will list deleted entries in the directory.
Modify the contents of the inode structure in the inode file-
Make a directory.
mknod filespec [p|[[c|b] major minor]]
Create a special device file (a named pipe, character or block
device). If a character or block device is to be made, the
major and minor device numbers must be specified.
ncheck inode_num ...
Take the requested list of inode numbers, and print a listing of
pathnames to those inodes.
open [-w] [-f] [-i] [-c] [-b blocksize] [-s superblock] device
Open a filesystem for editing. The -w flag causes the filesys-
tem to be opened for writing. The -f flag forces the filesystem
to be opened even if there are some unknown or incompatible
filesystem features which would normally prevent the filesystem
from being opened. The -c, -b, -i, and -s options behave the
same as those to debugfs itself.
pwd Print the current working directory.
quit Quit debugfs
rdump directory destination
Recursively dump directory and all its contents (including regu-
lar files, symbolic links, and other directories) into the named
destination which should be an existing directory on the native
Unlink pathname. If this causes the inode pointed to by path-
name to have no other references, deallocate the file. This
command functions as the unlink() system call.
Mark inode filespec as in use in the inode bitmap.
set_super_value field value
Set the superblock field field to value. The list of valid
superblock fields which can be set via this command can be dis-
played by using the command: set_super_value -l
List the contents of the super block and the block group
descriptors. If the -h flag is given, only print out the
Display the contents of the inode structure of the inode file-
testb block [count]
Test if the block number block is marked as allocated in the
block bitmap. If the optional argument count is present, then
count blocks starting at block number block will be tested.
Test if the inode filespec is marked as allocated in the inode
Remove the link specified by pathname to an inode. Note this
does not adjust the inode reference counts.
write source_file out_file
Create a file in the filesystem named out_file, and copy the
contents of source_file into the destination file.
debugfs was written by Theodore Ts'o <firstname.lastname@example.org>.
dumpe2fs(8), e2fsck(8), mke2fs(8)
E2fsprogs version 1.32 November 2002 debugfs(8)